Talkswitch CT.TS005.001101.UK - Manual (Page 23)

T A L K S W I T C H C O N F I G U R A T I O N 1 5
Button — Restore Firmware
This button is only available/active if a firmware update has failed. Click it
to start the TalkSwitch Firmware Update procedure and follow the
instructions. For information on Firmware updates, refer to section 3.8 —
Upgrading the TalkSwitch Software and Firmware.
2.3 SYSTEM CONFIGURATION
2.3.1 The configuration screen
The configuration screen consists of the following parts:
1. Menu Items
2. Configuration Navigation (expandable): Controls the display in the
configuration window
3. Configuration Window: Displays configuration information and
TalkSwitch image.
4. View System Information:
Click this link to view each TalkSwitch unit’s MAC address, IP address,
hardware version and firmware version.
5. Region: Indicates the region where TalkSwitch is intended to operate
X
Y
Z
[
\