Talkswitch CT.TS005.001101.UK - Manual (Page 42)

3 4 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
The comparison is based on finding the maximum number of leading digits
that match. If a match is found the call follows the action specified in the
ARS table. The action can be to block the call with an announcement or
re-route it to an alternative Line Hunt Group. The Line Hunt Groups are setup
to direct calls to specific telephone lines or VoIP trunks connected to
different network service operators. If there are no matching entries in the
ARS table, the call proceeds without any redirection or restriction to the Line
Hunt Group whose access code was originally dialed by the caller or specified
for direct line access.
Planning Automatic Route Selection and Toll Restriction
• Identify the leading digits of the numbers for the calls to be routed or
blocked.
• Identify which telephone lines and VoIP trunks are connected to different
networks and services.
• Identify which extensions’ calls you wish to route or block.
Configure Line Hunt Groups (also, see section 2.3.3.6)
Ensure that the Line Hunt Groups are configured.
In the TalkSwitch Configuration software, click System Information ->
Line Hunt Groups. We recommend that each network service provider’s
telephone lines or VoIP trunks are assigned to a separate line hunt group.
You can define a name for each line hunt group and adjust the order in which
the telephone lines will be used for outgoing calls.
• Type a name into the Line Hunt Group name: field (up to 20 characters).
• Click the check box next to the lines you wish to include in the line hunt
group.
• Click/highlight the telephone line you wish to move.
• Click the Move Up or Move Down button to reflect the desired selection
order.
Overflow calls to another network when preferred lines are busy
Calls can overflow to an alternative network operator’s lines when the
preferred lines are busy. For example, if the first two lines are reserved for
local calls and both those lines are busy, you can allow outgoing calls on the
next line, even thought that line might be your preferred long-distance
connection.
• Click the check box next to the line(s) where you want the calls to
overflow if the preferred lines are busy.