Talkswitch CT.TS005.001101.UK - Manual (Page 36)

2 8 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
Outbound Proxy:
Enter the Outbound Proxy (if required) associated with the Service
Provider.
Realm/Domain:
Enter the Realm/Domain (if required) associated with the Service
Provider.
VoIP numbers
The descriptions for the VoIP numbers under the TalkSwitch Profile tab are
the same for the items below.
VoIP numbers available for use with this Service Provider:
Maximum number of VoIP numbers for incoming calls:
Maximum number of VoIP numbers for outgoing calls:
View Registration Status (button)
Click this button to view if this system is registered with the designated
Registrar Server.
2.3.3.4 PSTN analogue telephone Lines
To configure telephone lines go to the System Information and Telephone
Line folder. Select the tab for the telephone line to be configured. “Line
Detected” shows if the telephone line was detected when the system
configuration was last retrieved. To update the detected status select File
and Retrieve Settings from the menu. Save any changed settings before
retrieving the system’s current settings.
Note: If the units are networked, you need to configure the options for
all the units. At the top of the window, select the tab for each TalkSwitch
unit (labeled ‘TalkSwitch 1’, ‘TalkSwitch 2’, etc....) and follow the
instructions below.