Talkswitch CT.TS005.001101.UK - Manual (Page 83)

T A L K S W I T C H C O N F I G U R A T I O N 7 5
Pick up a telephone handset connected to the TalkSwitch and use the
following keypad commands to record the Prompted Call Back Announced
Message:
1. Press to enter command mode. Enter the password if required.
2. Enter the appropriate command as listed below. After each command,
press to confirm the entry.
Allow DISA (Call Bridge):
To allow DISA (Call Bridge) when a Call Back is accepted, check the Allow
Call Bridge box. You can restrict the DISA line access by clicking the Hunt
Group Access button. By default, Call Bridge is enabled when Call Back is
activated.
Call Bridge saves money while using Call Back or on its own. It bypasses the
high long distance rates for cell phones.
How to use DISA (Call Bridge):
1. Call into TalkSwitch from any out-of-office telephone.
To record message: 65
To playback message: 75
Note: The call back number shown is always the last number TalkSwitch
dials in the last Prompted Call Back session.
2.3.6.3 DISA
#
#