Attach transition sub, Attach beacon housing, Jt60/jt60 all terrain operator’s manual – Ditch Witch JT60AT User Manual
Page 100
Advertising
Conduct a Bore - 100
JT60/JT60 All Terrain Operator’s Manual
Assemble Drill String
Attach Transition Sub
Use either machine torque or Hydratong wrenches to attach transition sub.
Machine Torque
1.
Pull transition sub into front wrench.
2.
Close wrench.
3.
Lube joints.
4.
Slowly make up joint.
5.
Use full machine torque to tighten joint fully.
Hydratong
1.
Lube joints with TJC.
2.
Attach Beacon Housing
1.
Attach downhole tool to transition sub and hand tighten.
2.
Advertising
This manual is related to the following products: