Ditch Witch JT60AT - Manual (Page 170)

Service - 170
JT60/JT60 All Terrain Operator’s Manual
Recommended Lubricants/Service Key
Recommended Lubricants/Service Key
Proper lubrication and maintenance protects Ditch Witch equipment from damage and failure. Service
intervals listed are for minimum requirements. In extreme conditions, service machine more frequently.
Use only recommended lubricants. Fill to capacities listed in “Fluid Capacities” on page 225.
Item Description
Tier 4i
DEO Diesel engine oil meeting or exceeding Cummins 20081, API CJ-4, ACEA E9.
• Engine must use low SAPS oil (ash will plug aftertreatment device.)
• Use viscosity grade SAE 15W40 unless ambient temperatures below 5° F (-15° C) are expected. Lower
viscosity oils must meet the performance specifications shown above.
API American Petroleum Institute, ACEA European Automobile Manufacturer’s Association.
Tier 3
DEO Diesel engine oil meeting or exceeding Cummins 20078, API CH-4, ACEA E5.
NOTICE: Shipped from factory with CJ-4 DEO. Change oil initially at 250 hrs.
Use viscosity grade SAE 15W40 unless ambient temperatures below 5° F (-15° C) are expected. Lower
viscosity oils must meet the performance specifications shown above.
API American Petroleum Institute, ACEA European Automobile Manufacturer’s Association.
TF30 Phillips 66 Torque Fluid, 30W
MPG Multipurpose grease. Use polyurea based NLGI GC-LB Grade 1.5 or lithium based
NLGI GC-LB Grade 2.
MPG Pump seal grease, similar to 94050 Philube blue multipurpose
MPL Multipurpose gear oil meeting API service classification GL-5 (SAE 80W90)
THF Tractor hydraulic fluid, similar to Phillips 66 HG, Mobilfluid 423, Chevron Tractor
Hydraulic Fluid, Texaco TDH Oil, or equivalent
TJC Tool joint compound: Ditch Witch standard (p/n 259-858) or summer grade (p/n 256-
031)
DEAC Diesel engine antifreeze/coolant meeting ASTM D5345 (prediluted) or D4985
(concentrate)
Check level of fluid or lubricant
Check condition
Filter
Change, replace, adjust, service or test