Ditch Witch JT60AT - Manual (Page 89)

JT60/JT60 All Terrain Operator’s Manual
Transport - 89
Haul
Haul
Load
1. Fasten and adjust seat belt.
2. Start drilling unit engine.
3. Move drilling unit to rear of trailer and align with ramps or center of trailer bed.
4. Slow engine to low throttle and slowly drive unit onto trailer.
5. Lower stabilizers to trailer floor.
6. Lower drill frame to trailer floor.
7. Stop engine when unit is safely positioned on trailer bed.
8. Attach tiedowns to drilling unit where tiedown decals are located.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
To help avoid injury:
• Load and unload trailer on level ground.
• Verify that trailer wheels are blocked.
• Attach trailer to vehicle before loading or unloading.
• Place ten to fifteen percent of total vehicle weight (equipment plus trailer) on tongue to help prevent
trailer sway.