Ditch Witch JT60AT - Manual (Page 90)

Transport - 90
JT60/JT60 All Terrain Operator’s Manual
Haul
Tie Down
Points
Tiedown points are identified by tiedown decals. Securing to trailer at other
points is unsafe and can damage machinery.
Procedure
Loop a transport chain around each tie down
point. See chart below for correct distances
between tiedown ends. Make sure tiedowns are
tight before transporting.
NOTICE:
• Wrenches can open after engine shutdown. Ensure that any pipe in wrenches is attached to spindle
and downhole tools are removed from the pipe before transport.
• Use Grade 7-3/8” (18.7 cm) transport chain to secure drilling unit.
Distance Measurement
A greater than 18”
B less than 50”
C greater than 10”
j40om068w.eps
A
A A
A
B
C C