Ditch Witch JT60AT - Manual (Page 23)

JT60/JT60 All Terrain Operator’s Manual
Controls - 23
Setup Controls
2. Right stabilizer control To raise, push up.
To lower, pull down.
IMPORTANT: Lower left and right
stabilizers to the ground together,
then adjust individually.
3. Back frame tilt control To raise, push up.
To lower, pull down.
IMPORTANT: To ensure a stable
platform for drilling, use front and
back tilt controls together to set frame
at desired pitch without raising tracks
off the ground.
4. Front frame tilt control To raise, push up.
To lower, pull down.
IMPORTANT: To ensure a stable
platform for drilling, use front and
back tilt controls together to set frame
at desired pitch without raising tracks
off the ground.
5. Washer on/off switch To start windshield washer
fluid, press and hold top.
To stop washer fluid flow,
release.
Item Description Notes
c00ic045w.eps