Jt60/jt60 all terrain operator’s manual – Ditch Witch JT60AT User Manual
Page 186
Advertising
Service - 186
JT60/JT60 All Terrain Operator’s Manual
50 Hour
Check Hex
Shine flashlight into spindle and check condition
of hex (1) every 50 hours. Replace if rounded.
To replace:
1.
Remove SaverLok. Do not remove indexing
dowels from spindle.
2.
Slide hex (1) and spring (2) off of drive shaft.
3.
Check condition of drive pin (3) and replace if
needed. Lubricate drive shaft.
4.
Check o-ring on inner water swivel (seal kit)
and replace if needed.
5.
Install new spring and hex.
6.
Advertising
This manual is related to the following products: