Ditch Witch JT60AT - Manual (Page 201)

JT60/JT60 All Terrain Operator’s Manual
Service - 201
As Needed
Check Front Pipe Guide Blocks
Check front pipe guide blocks for wear. Rotate
blocks for longer wear, or replace as needed. See
your Ditch Witch dealer for replacement parts.
To replace:
1. Remove lynch pins (1, one on each side).
2. Remove guide blocks (2).
3. Replace in reverse order.
Check Fluid Pump Ball Valve
Check hydraulic ball valve for leaks. Tighten stem
packing as needed. See your Ditch Witch dealer
for replacement packing.
Check Track Tension and Condition
Check track tension and condition, and adjust or
replace as needed. See your Ditch Witch dealer for
replacement parts.
To adjust:
1. Pump MPG into fitting (A) until spring height is
17 3/4-18” (451-457 mm) when measured
through windows (B).
2. Drive straight forward one machine length and
check tension again.
j40om049w.eps
j40om050w.eps
j40om051w.eps
A B