Ditch Witch JT60AT - Manual (Page 198)

Service - 198
JT60/JT60 All Terrain Operator’s Manual
As Needed
As Needed
Drilling Unit
Change Air Filter
Change air filter when red band on air filter service
indicator (1) pops up.
To change:
1. Unclip and remove end cap (4).
2. Remove elements (2, 3).
3. Wipe inside of housing and wash end cap.
4. Install new elements.
5. Install end cap and tighten clamp ring.
6. Reset air filter service indicator.
Location Task Notes
DRILLING
UNIT Change air filter
Change auto lubricator TJC pail TJC
Change hydraulic filters any time system is opened
Check pipeloader inserts
Check and adjust carriage rollers and slide bars
Check front pipe glide blocks
Check pipe lubricator insert
Check fluid pump ball valve
Check track tension and condition
Check track support slide pads
Check SaverLok
Replace fuses
Change inner water swivel (seal kit)
Inspect battery
Charge battery
j40om063w.eps
1
2
3
4