Ditch Witch JT60AT - Manual (Page 159)

JT60/JT60 All Terrain Operator’s Manual
Systems and Equipment - 159
Machine Diagnostic Codes
• A non-essential code affects non-essential functions of the unit. If the system detects a non-essential
problem, a diagnostic code will be recorded and the diagnostic light will flash for 10 seconds and then
go out. Each time ignition is turned on, full operation will be available until the diagnostic system
detects a problem.
• An essential code affects rotation, thrust, drilling fluid, or ground drive. If the system detects an
essential problem, a diagnostic code will be recorded and the diagnostic light will cycle on for three
seconds and off for 1/2 second. Some machine functions may not work until the problem is corrected.
Each time ignition is turned on, full operation will be available until the diagnostic system detects a
problem.