Ditch Witch JT60AT - Manual (Page 173)

JT60/JT60 All Terrain Operator’s Manual
Service - 173
Each Use
Each Use
Downhole Tools
Lube Drill Head
Lube drill head with pump seal grease (p/n 255-
1019) every 8 hours and after every bore.
To lube:
1. Remove hex plug.
2. Install zerk.
3. Rotate drill head by hand and fill with pump
seal grease until it comes out at front seal.
4. Remove zerk.
5. Replace hex plug.
Location Task Notes
DOWNHOLE
TOOLS Lube drill head pump seal grease
(p/n 255-1019)
NOTICE: See “Drill Pipe” on page 143 for information and precautions regarding drill pipe.
j07om039h.eps