Ditch Witch JT60AT - Manual (Page 164)

Complete the Job - 164
JT60/JT60 All Terrain Operator’s Manual
Rinse Equipment
Rinse Equipment
Using Washwand
Connect the washwand at quick connect (1) at
rear of unit. Open valve (2) to start water flow.
Close valve to stop water flow.
Spray water onto equipment to remove dirt and mud. Some pressure might be needed to remove dried
mud from wrench area.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
To help avoid injury, prime the drilling fluid pump before use. Failure to prime the drilling fluid pump will
cause flow fluctuations, which will make it difficult to control the washwand. For instructions, see “Prime
Drilling Fluid Pump” on page 96.
Pressurized fluid or air could pierce skin and cause injury
or death. Stay away.
NOTICE: Do not spray water onto operator’s console. Electrical components could be damaged. Wipe
down instead.
1
2
j40om056w.eps