Ditch Witch JT60AT - Manual (Page 35)

JT60/JT60 All Terrain Operator’s Manual
Controls - 35
Left Control Console
10. Manual inner rotation
control
To rotate clockwise, move to
top.
To rotate counterclockwise,
move to bottom.
To stop inner rotation,
release.
IMPORTANT:
• Inner spindle control must be in
manual position for this control to
work.
• Range of speed is reduced to
allow easier manual control.
• Up/down paddle is spring
centered. Moving it above center
rotates inner rod clockwise.
Moving it further rotates the rod
faster. Moving it below center
does the same for counter
clockwise rotation.
11. ESID Alarm interrupt /
self test button
To turn off strike alarm at
drilling unit, press top.
To start manual self test,
press bottom.
To reset system after a strike
has been detected, press
bottom.
Self test checks all systems and
circuits except voltage limiter.
IMPORTANT: See “If an Electric Line
is Damaged” on page 14.
Item Description Notes
c00ic051w.eps
c00ic054w.eps