Ditch Witch JT60AT - Manual (Page 84)

Drive - 84
JT60/JT60 All Terrain Operator’s Manual
Start Unit
Start Unit
1. Insert key.
2. Turn ignition switch to the run position (key on, engine off). Engine preheat indicator (on engine
display) will light.
3. Wait for engine preheat indicator to go off before starting.
4. Run engine at low throttle for 5 minutes.
Steer Unit
To steer drilling unit, follow instructions for type of steering desired.
To steer while moving forward, push forward and then move to left or right.
Drilling unit will gradually turn to left or right.
To steer while moving backward, pull back and then move to left or right.
Drilling unit will gradually turn to left or right.
For tight steering in low speed, move control to center position and then to a
corner. Tracks will counter-rotate and turn drilling unit in a tight circle.
IMPORTANT: Survey field of vision before operating the machine and position all mirrors provided to
ensure that visibility is not restricted.
c00ic145h.eps