Altera POS-PHY Level 2 and 3 Compiler - Manual (Page 16)

2–4 Chapter 2: Getting Started
POS-PHY Level 2 & 3 Walkthrough
POS-PHY Level 2 and 3 Compiler User Guide © November 2009 Altera Corporation
Preliminary
2. Specify that you want to create a new custom megafunction variation and click
Next.
3. Expand the Communications > POS-PHY directory then click POS-PHY Level 2
& 3 Compiler .
4. Select the output file type for your design; the wizard supports VHDL, and
Verilog HDL.
5. The MegaWizard Plug-In Manager shows the project path that you specified in the
New Project Wizard . Append a variation name for the MegaCore function output
files <project path>\<variation name>. Figure 2–3 shows the wizard after you have
made these settings.
6. Click Next to launch IP Toolbench.
Figure 2–2. MegaWizard Plug-In Manager
Figure 2–3. Select the Megafunction