Altera POS-PHY Level 2 and 3 Compiler User Manual
Page 18
2–6
Chapter 2: Getting Started
POS-PHY Level 2 & 3 Walkthrough
POS-PHY Level 2 and 3 Compiler User Guide
© November 2009
Altera Corporation
Preliminary
4. Click Next.
5. Select your interface types (see
Figure 2–6
).
a. Select interface ‘A’ using the radio buttons.
b. Choose ‘B’ interfaces using the drop-down menus.
6. Click Next.
7. Choose the interface settings (see
Figure 2–7 on page 2–6
).
1
POS-PHY Level 3 Specification, Issue 4, June 2000 supports an 8- or 32-bit
interface. Additionally this MegaCore function supports a 16-bit interface
for POS-PHY level 3.
1
POS-PHY Level 2 Specification, Issue 5, December 1998 supports a 16 bit
interface. Additionally, this MegaCore function supports 8- and 32-bit
interfaces for POS-PHY level 2.
1
The Atlantic interface can be 8-, 16-, 32-, or 64-bits wide.
Figure 2–6. Select the Interface Types
Figure 2–7. Choose the Interface Settings