Cadac F-Type - Manual (Page 31)

Central Control Module 7896 2-3
Revision F2005-2 F-Type
J, 6WHUHR#VHQGV
Eight momentary switches allowing you to put the associated aux group in stereo-
mode. The LED to the left of the switch illuminates when the Aux group is in stereo.
K, 0,',#(QDEOH#VZLWFKHV
ON switches for MIDI ports A and B. The switches are momentary and illuminate
when the functions are enabled.
M, (9(17#/('V#DQG#(1$%/(
The LEDs show the operation of the EVENTS relays. The LEDs will only illuminate
when the ENABLE switch is ON.
N, 0RGXOH#,VRODWH#0#VHW#DQG#FOHDU
These two switches perform global switching of ISOLATE function for programmable
functions such as channels and groups, in order to disconnect the console automa-
tion system.
P, 0RWRU#)DGHUV
This group of buttons provides a quick and convenient way of setting the console
automation system to both record and control the movement sequences of motor
faders.
The top left pair control the play/pause and stop for the first dynamic sequence
(dynamic A) in a Cue.
The top right pair control the play/pause and stop for the second dynamic sequence
(dynamic B) in a Cue.
Both dynamics can be run simultaneously in the same cue.
Accidental movement of the motor faders can be prevented by use of the ALL SFE
and ALL RDY keys. In SAFE mode, touching the faders knob will have no impact on
the recorded sequence. In READY mode touching the fader knob will cause the
motor fader logic to toggle between READY and WRITE modes.
Therefore, editing of a recorded sequence can be performed for as long as the fader
knob is actually touched and the fader remains in the READY mode.