Cadac F-Type - Manual (Page 65)

VCA Group module 7578 5-1
Revision F2005-2 F-Type
8 9&$#*URXS#PRGXOH#:8:;
This module contain a single mono subgroup with sends to the matrix, plus two
matrix outputs. The VCA group also contains a VCA master fader and controls. A
balanced, switchable insert point is provided for matrix output EQ or processing. The
matrix output may be monitored pre-fade (post-insert) under the control of the logic-
assisted monitoring system.
The sub group is routed to the matrix masters via 24 rotary controls. Each of these
offer 0dB gain when rotated fully clockwise. The sub group normally routes to the
matrix post-fade, but may be selected to be pre-fade (post-insert), leaving the sub
group fader controlling the direct output.
A switchable, balanced insert point is provided for sub group processing. The sub
group output may be monitored pre-fade (post-insert) under the control of the logic-
assisted system.
The 7578 is optionally available with a motorised fader.
The following pages describes the VCA Group module in detail.