Cadac F-Type - Manual (Page 49)

Input modules 3-1
Revision F2005-2 F-Type
6 ,QSXW#PRGXOHV
614 9&$#,QSXW#0RGXOH#:8;6
The VCA Input Module has a dual input which accepts a wide range of input sources.
The input signal may be routed to any or all of the 12 subgroups available on the sys-
tem. A PAN control can also be inserted, linking any odd or even subgroups for ste-
reo purposes. A separate Direct Output can be provided as an option.
The sixteen mono (or eight stereo) Aux Send sections have each ON/OFF and Pre/
Post switches.
The equalizer and the LP/HP filters can be switched in and out separately. Each EQ
section has controls for ±18dB cut and boost, variable frequency and Q. There are
four EQ bands.
The channel PFL and Mute switches are situated near the fader section of the mod-
ule, above and below the DC-group display. Each of the Mic amps has an individual
PFL switch.
The 7583 is optionally available with a motorized fader.
See the following pages for detailed information about the VCA Input Module.
The F-Type Input modules have all features in common with the following exceptions:
9&$#,QSXW#PRGXOH#:786
The 7453 is similar to 7583 above, but has only eight mono Aux Send groups .
The 7453 is optionally available with a motorized fader.
,QSXW#0RGXOH#:8;7
The 7584 is similar to 7453, but has only one mic input.
,QSXW#0RGXOH#:854
The 7521 is similar to the 7583, but has a NON VCA fader.
,QSXW#0RGXOH#:848
The 7515 is similar to the 7521 but has only one mic input.