Cadac F-Type - Manual (Page 47)

Central Control Module 7896 2-19
Revision F2005-2 F-Type
L, 5HYHUW#7LPH
The time it will take for a motorized fader to resume its original position is set using
the option
Revert Time in the User Setup in the CCM. Enter a value with the numeri-
cal button and then press Enter.
M, 3&#&RPPV#(UURU
If the F-Type is used without a PC, this function disables the “ERR” button and pre-
vents it from flashing because of missing Comms. There are two modes; “Hard” and
“Soft”. Hard mode will cause the “ERR” button to flash when Comms are missing
(when a PC and a CCM are used) and Soft mode will cause the “ERR” button to
flash in the event of any other error than missing Comms.
■ ■ ■ ■ Using the arrow keys, select “PC Comms Error?” from the User Setup menu and
press Enter.
The display shows “ PC Error: “
■ ■ ■ ■ Press Enter to toggle between Hard and Soft.
■ ■ ■ ■ Press Esc.
N, *OREDO#OHYHO
This function is not yet implemented.