Cadac F-Type - Manual (Page 70)

5-6 VCA Group module 7578
F-Type Revision F2005-2
814155 ,VRODWH
When ISO is ON, the fader is in effect disconnected from the computer system. It
cannot send commands to the computer or receive commands from the computer,
but the fader still responds as a VCA master.
All faders, including DC Masters may be put in isolate mode by pressing the MOD-
ULE ISOLATE “SET” on the CCM. Similarly, all faders, including DC Masters may be
taken out of isolate mode by pressing the MODULE ISOLATE “CLEAR” switch on the
CCM.
814156 '&#0DVWHU#IDGHU
A 100mm Penny & Giles fader controls all channel VCA faders selected to it.
814157 )DGHU#23(1
The Fader Open LED illuminates as soon as the fader moves away from the infinity
mark, unless the MUTE function is set ON locally or under program control.