Cadac F-Type - Manual (Page 42)

2-14 Central Control Module 7896
F-Type Revision F2005-2
■ ■ ■ ■ If there is a fault, a fault code is displayed indicating the type of fault.
This test automatically returns to “Test comms?”.
K, 6KRZ#7LPH
In the system menu, select “ Test Routines?” using the Up or Down arrow button.
The display shows “ Test Routines?”.
■ ■ ■ ■ Press [
↵
], followed by the Down Arrow button, until the display shows “ Show
Time?”
■ ■ ■ ■ Press [ ↵ ]. The display shows the time as set in the PC.
Press [Esc] to return to the system menu or Down arrow to perform next test.
L, 6KRZ#'DWH
In the system menu, select “ Test Routines?” using the Up or Down arrow button.
The display shows “ Test Routines?”.
■ ■ ■ ■ Press [
↵
], followed by the Down Arrow button, until the display shows “ Show
Date?”
■ ■ ■ ■ Press [ ↵ ]. The display shows the date as set in the PC.
Press [Esc] to return to the system menu or Down arrow to perform next test.
NOTE: The Time/Date do not increment when power is removed from the console.
They rely upon SAM updating them when communications are first established.
M, 9LHZ#(UURU#/RJ
In the system menu, select “ Test Routines?” using the Up or Down arrow button.
The display shows “ Test Routines?”.
■ ■ ■ ■ Press [
↵
], followed by the Down Arrow button, until the display shows “ View Error
Log?”
■ ■ ■ ■ Press [ ↵ ]. The display lists the time and date of errors/events.
■ ■ ■ ■ Select Time/Date with the arrow keys.
■ ■ ■ ■ Press the Right arrow key to display the type of error.
■ ■ ■ ■ Press the Left arrow key to get back to the list of time/date.
NOTE: Some messages are included in the error log for debugging purposes that
are not in themselves errors. Examples are Time/Date reset or Host is Séance on
the display are not errors.
Press [Esc] to return to the system menu.
N, &OHDU#(UURU#/RJ
In the system menu, select “ Test System?” using the Up or Down arrow button.
The display shows “ Test System?”.
■ ■ ■ ■ Press [
↵
], followed by the Down Arrow button, until the display shows “ Clear
Error Log?”
■ ■ ■ ■ Press [
↵ ↵↵ ↵
]. The log is cleared and the event is entered in the Error log.
This test automatically returns to the system menu.