Cadac F-Type User Manual
Page 32
2-4
Central Control Module 7896
F-Type
Revision F2005-2
############
PLAY/PAUSE (1)
Plays, pauses or continues a recorded sequence of
motor fader movements associated with dynamic A. If
recording is enabled with the push-button (8), then this
button starts either a new recording, or starts an update
of an existing dynamic.
PLAY/PAUSE (2)
Plays, pauses or continues a recorded sequence of
motor fader movements associated with dynamic B.
STOP (3, 4)
Stops the recorded sequence of motor fader
movements.
SET READY (5)
This mode allows individual faders to be “toggled”
between safe and ready mode by touching the fader
knob.
ALL READY (6)
Sets all motor faders to ready mode.
ALL SAFE (7)
Sets all motor faders to safe mode.
RECORDING ENABLED (8)
Prepares the computer for recording of a dynamic
sequence. Pressing button (1) starts the actual
recording.
Q,
0XOWL#IXQFWLRQ#DOSKD0QXPHULF#GLVSOD\
The 16 character alphanumeric display is the communication window between the
operator and the F-Type operating system.
In normal operating conditions the display will show one of the following:
CUE number, or
Current Memory number, or
“cadac ‘F-Type’ “ if no cue or memory is selected
The display is also used for system messages via the [err] button and to traverse the
various menus for testing, mapping, etc.
FIG 2-2. Keypad for controlling dynamics.