Cadac F-Type - Manual (Page 93)

Auxiliary Output Module 7468 9-1
Revision F2005-2 F-Type
< $X[LOLDU\#2XWSXW#0RGXOH#:79;
The Auxiliary Output Module 7468 has eight identical balanced outputs which may
be used for effects sends, foldback mixes or other auxiliary functions. A master level
control is provided, with a gain of 0dB when fully clockwise. The pre-fader monitoring
is under the control of the F-Type’s logic assisted PFL system and the module has
manual mute for security.
The post-fade auxiliary output is metered by a 20 segment peak-reading LED bar-
graph The auxiliary outputs are each electronically balanced and each output section
of the module is fitted with a scribble strip for easy identification.
A single Aux Output Module is required for Basic and VCA consoles; if a frame is fit-
ted with Super Input modules, two should be fitted, in which case one will control
Auxes 1A to 8A while the other controls 1B to 8B.
The following pages describes the Auxiliary Output module 7468 in detail.