Cadac F-Type - Manual (Page 38)

2-10 Central Control Module 7896
F-Type Revision F2005-2
51716 6DYLQJ#D#FRQVROH#VWDWH#WR#DQ#LQWHUQDO#PHPRU\
To save a console state to an internal memory, the CCM must be at one of its “root”
displays, (see above for descriptions of the root displays). You can always get back to
the root display by pressing the [Esc] key several times.
■ ■ ■ ■ Press the [Mem] key.
■ ■ ■ ■ Enter the number for the internal memory.
■ ■ ■ ■ Press the [Sve] key.
The console state is saved to the internal memory.
51717 5HFDOOLQJ#D#FRQVROH#VWDWH#IURP#WKH#LQWHUQDO#PHPRU\
To recall a console state from an internal memory, the CCM must be at one of its
“root” displays, (see above for descriptions of the root displays). You can always get
back to the root display by pressing the [Esc] key one or two times.
■ ■ ■ ■ Press the [Mem] key.
■ ■ ■ ■ Enter the number of the internal memory required.
■ ■ ■ ■ Press the [Rcl] key.
The current console state is replaced by the state stored in the internal memory.
518 7KH#6\VWHP#6HWXS#PHQX
This is a set of menus which are navigated by using the up and down arrow keys [ ↑ ]
and [ ↓ ], with selections being made by pressing enter [ ↵ ], and cancelled by pressing
[Esc].
Menu items appear in the display with either a question mark (?) or pair of
arrows(
⇑⇓ ) on the right. The arrows indicate that this is the title of the current menu
and that the user should press the up and down arrow keys to make a selection. The
question mark means that this is a selectable item, (press [
↵ ] to select). The menu
wraps around, so if you move down from “User setup?” you get to “System setup
⇑⇓
“again. In order to speed up the action of traversing these menus, they do not
reset themselves to the title position each time that they are used. For example; if
“Map Faders?” was selected the last time the [Sys] key was pressed, then the “Map
Faders?” option will appear again, the next time the [Sys] is pressed (provided that
the CCM has not been reset).
Press the [Sys] key.
The first menu contains the following items:
#
System setup ⇑⇓ Title
Map Faders ? Perform fader mapping.
Test Routines ? Move to the system test menu
User setup ? Move to the user setup menu
The Map Faders, options will immediately perform that operation, whereas the Test
System, User Setup, MIDI recorder and MIDI muting selections lead on to other
menus:
System Test
⇑⇓
Title
Inc All Faders ? Test routines for channel and group faders
Show MFdr data ? Read information from the motor faders
Test Motor Fdrs ? Check mechanical operation of motor faders
Test Keys ? Check keys indicate on the display
Test MIDI ? Send programme changes to MIDI-connections
Test Events ? Check relays and indication of events
Test Fdr Comms ? Check communications busses
Show Time ? Show real-time clock
Show Date ? Show real-time clock and date
View Error Log ? Look through the last recorded errors
Clear Error Log ? Clear the error log.