2 to record captured images as a video file, To record captured images as a video file – Epiphan DVI2PCIe Duo User Manual
Page 35
Windows Video Capture Application
31
DVI2PCIe Duo User Guide
the Recording tab (Tools – Options). The Status bar displays the name and
location of the last saved file. Pause recording by using the key combination
CTRL+U, by selecting Pause from the Capture menu or
from the toolbar.
2. Stop recording by selecting Stop Recording from the Capture menu or
from
the toolbar. When you stop recording images, the status bar displays the number
of image files saved.
9.3.2
To record captured images as a video file:
Before recording captured images as a video file, you must configure the recording
options by selecting Options from the Tools menu, then selecting the Recording tab,
and select Record as Video. Refer to Configuring Recording Options.
1. Select Start Recording from the Capture menu or from the toolbar select
.
2. In the Save as dialog box enter the file name, select the location for saving the
video file, and click Save. Record video in AVI format only.
As images are captured by the frame grabber, they are recorded to the video file. The
status bar displays the name and location of the video file. The status bar also
displays the elapsed time the video has been recording and the number of frames (or
images) recorded.
When the size of the video file reaches the AVI file size limit that was set in the
Configuring Recording Options section, the following occurs based on the settings you
selected:
o
stops recording;
o
starts a new video file and continues recording (Configuring Recording
Options section describes how to specify the file name); or