JB-Lighting Licon 1X - Manual (Page 122)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 122 -
26.4 FEATURE SELECTION
CLEAR: deletes the current values.
FREEZE: freezes parameters.
FOLLOW: selects single fixtures to the trackball.
PAN/TILT, MOVING PATTERNS, SPEED,GOBO1 G-ROT
1, GOBO 2 G-ROT 2, GOBO 3 EXTRA, COLOR 1 COLOR
2, C/Y/M, IRIS, SHUTTER, DIMMER, ZOOM FOCUS,
PRISM P-ROT, FROST:
activate the individual fixture parameters.
PAR 1-32, PAR 33-64, PAR 65-96:
activate PAR channels.
ON/OFF: turns the console on and off.
PRESET-FADE: fader used to enter the fading time
between two presets.
26.5 COMBI
The Combi section performs all storage and edit functions for cues
(scenes), chases and sequences, which contain either only fixtures or
fixtures and PAR channels. In addition, all presets for fixtures as well as
for PAR channels are stored by means of the keys of the Combi section.
26.6 PAR
The PAR section performs all storage and edit functions for cues
(scenes) and chases, which only contain PAR channels and which are
activated by the PAR faders.
For pure PAR cues and chases stored with the key of this section, the
HTP principle applies, i.e. the highest DMX value takes precedence.
Cues and chases can only be activated with the PAR faders.