JB-Lighting Licon 1X - Manual (Page 95)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 95 -
18.11 Storing chases in the PAR-section
As described for chases in Chapter 11 Chases in the Fixture section, also 96 absolute PAR chases can
be stored on one level. The storage of PAR chases is carried out in the PAR section. It does not matter
here, whether the chases are stored from cue keys or from the PAR faders (1-8).
You have access to this level exclusively via the PAR fader bank
(faders C1-C4).
18.11.1 Linking of PAR chases to PAR faders
Before you can activate all 96 PAR chases possible in the PAR section, the PAR faders (C1-C4) must be
linked with these 96 chase storage places.
Press the Select key in the Chase Control section and simultaneously a flash key (C1-C4). Release both
keys again and press the Select key again. The following display is shown:
The active chase of our example is indicated as 1A04, i.e.
Fader C4 on Page 1, Bank A.
Use the middle encoder wheel to select the next chase that
shall run on this fader. In our example, this is Chase 07 on
Page 1, Bank B.
Press the Select key again to return to the Standard menu. The chase selected will become active on the
corrsponding fader, as soon as this fader is drawn to zero.