JB-Lighting Licon 1X - Manual (Page 65)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 65 -
11.2.3.4 Inserting a step
1. Select the desired fixture(s) (LED must be lit).
2. Use the middle encoder wheel (STEP) to select the step, before which you wish to
insert the new step.
3. Confirm by pressing the softkey INSERT.
11.2.3.5 Deleting a step
1. Use the middle encoder wheel to select the step to be deleted.
2. Confirm by pressing the softkey DEL ST.
11.2.3.6 Naming the sequence
1. Press the softkey NAME.
2. Delete the designation SEQ with the arrow key.
3. Enter the new name with the keys of the Cue/Chase/Sequence section.
Press the softkey „ 2 ( 6) >>>“ to leave this
function.
11.2.4 Pages 3 and 4 of the chase generator (chase patterns)
A total of 24 chase patterns are available on pages 3 and 4 of
the chase generator. These are selected with the
corresponding softkeys and combined with the fixture
sequence programmed previously.
Chase patterns are displayed in the form of a matrix that
shows the ON and OFF values of a the features of a chase.