JB-Lighting Licon 1X - Manual (Page 47)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 47 -
7.7 R-LINK / Setting the release link function
Cf.: Chapter 6.1.7 Entering the release link function and 6.1.8 Working with the release link function.
Press and hold the softkey R-LINK (R-LINK is displayed inverted).
Then press the cue key (stop-cue), on which the zero values of the desired parameters have been stored.
You can see your entries on the display. Next to the three letters RLM, the storage place and the name of
the cue, on which you have stored the release link, are displayed. If you have set a release link, you can
recall this link with the RELEASE and FLASH key.
7.8 Changing the fade time
Enter the Edit Cue menu and change the fade time by turning the corresponding encoder wheel
(FADETIME).
7.9 Changing the trigpoint
Enter the Edit Cue menu and change the trigpoint by turning the corresponding encoder wheel
(TRIGPOINT).