Wavetronix Command Translator (CMD-DT) - User Guide - Manual (Page 130)

CHAPTER 11 • TASKBUILDER SUB-WINDOWS 129
Figure 11.4 – Trip Time Mapping
Trip Time Mapping Sub-window Elements
All elements except for the Destination Column List are identical to those in the Mapping
sub-window (see the Mapping Sub-window section of this chapter).
˽ Destination Column List – The Destination Column List contains columns that are
required for the trip-time calculator. These values are not editable and will be inputted
automatically when the sub-window opens. The minimum required sensor attribute
for trip times is the Sensor ID, which represents a unique ID for each sensor or detec-
tor. The Speed column represents the current speeds for each sensor ID.
Other destination columns may be visible depending on the template used to define
the trip-time calculation. The Lane/Approach ID template option is for sensors that
have detector areas subdivided into classifiable areas. To change the template used for
the trip-time calculation, click Set Template and the Trip Time Template sub-window
will open (see the next section).
Note
Setting a new template will clear all existing mappings from the Trip Time Mapping
sub-window.