Wavetronix Command Translator (CMD-DT) - User Guide - Manual (Page 49)

48 CHAPTER 4 • ROUTES PAGE
Figure 4.15 – Select Collector Sensors
The Collector Sensor List contains all the available sensors that are registered on each of the
Collector instances registered with the Translator service. (Collector services can be added
through the System >> Collectors tab. See the Collectors Tab section of Chapter 5 for more
information). The sensor listings have the following columns:
˽ Collector – The IP Address / Host Name of the Collector service
˽ Address – The address of the sensor, in format <IP Address>:<Port>[<ID>]
˽ Location – The location string of the sensor
˽ Description –The description string of the sensor
˽ Network – The sensor network(s) for the sensor. A Collector sensor may be assigned
to one or more networks, or none at all.
˽ Custom – A custom description string for the sensor
˽ Lanes – One checkbox for each of the lanes registered on that sensor. The sensor text is
in the format <lane number> - <direction>
˽ Asset Name – A field to enter a name for this asset
˽ Mile Marker – The mile marker for the asset (decimals allowed)
The sensor listings can also be displayed by approach or by sensor—this option can be
switched by using the Select Sensors By: field in the upper left. Switching to Approach will
display available approaches for that sensor which can be selected instead of lanes. Switch-
ing to Sensor simply displays a single checkbox to include that sensor (including all lanes)
as an asset.
The sensor listings can be filtered either by Collector instance or sensor network. To filter
the main grid, select a Collector instance and/or sensor network from the menu options