Wavetronix SmartSensor Matrix (SS-225) - User Guide - Manual (Page 14)

In this chapter
˽ Sensor Mounting Guidelines
˽ Attaching the Mount Bracket to the Pole
˽ Attaching the Sensor to the Mount Bracket
˽ Aligning the Sensor to the Roadway
˽ Applying the Silicon Dielectric Compound
˽ Connecting the SmartSensor 6-conductor Cable
˽ Grounding the Sensor
1
The installation process includes attaching the mounting bracket to the pole; attaching the
sensor to the mounting bracket; aligning the sensor; applying a silicon dielectric compound
to the sensor connector; and connecting the SmartSensor 6-conductor cable to the sensor.
Caution
Do not attempt to service or repair this unit. This unit does not contain any compo-
nents and/or parts serviceable in the field. Any attempt to open this unit, except
as expressly written and directed by Wavetronix, will void the customer warranty.
Wavetronix is not liable for any bodily harm or damage caused if service is attempted
or if the back cover of the SmartSensor unit is opened. Refer all service questions to
Wavetronix or an authorized distributor.
Installing the SmartSensor Matrix
1