Wavetronix SmartSensor Matrix (SS-225) - User Guide - Manual (Page 50)

In this chapter
˽ Serial Connection
˽ Internet Connection
˽ Virtual Connection
˽ Viewing Connection Info
˽ Upgrading the Sensor’s Embedded Software
5
Once the sensors are installed, use the SSMM software to change settings, view data and
configure the sensors to the roadway.
Launch SSMM by either clicking on the icon that was placed on your desktop or clicking
the icon found in the Start menu. The SSMM splash screen and then main screen shown in
Figure 5.1 will appear.
Communication
5