Yaskawa Junma Series SERVOPACK - Manual (Page 74)

5.12 Communication Unit
E-73
English
„ Operation
Never run the SERVOPACK with a digital operator or JunmaWin connected.
Use a digital operator or JunmaWin only during:
• Setup, such as when the gear ratio is changed, and
• Maintenance, such as when the Monitor function is used to confirm the status.
„ Dimensions
„ Specifications of Connector for PC (CN9)
Connector Specifications
Connector Pin Arrangement
Item Manufacturer Model
Board-side Hirose Electric Corporation DF11-4DP-2DS(52)(4P)
Connector-side Hirose Electric Corporation DF-4DS-2C(4P)
Pin
Number
Symbol I/O Function
Pin
Number
Symbol I/O Function
1 /TXD I Transmitting 3 GND – GND
2 /RXD O Receiving 4 GND – GND
CN52
CN3
CN9
66.5
28
67 71
(4)
Unit: mm