Yaskawa Junma Series SERVOPACK - Manual (Page 8)

E-7
English
„ Storage and Transportation
„ Installation
• Do not store or install the product in the following places.
Failure to observe this caution may result in damage to the product.
• Locations subject to direct sunlight.
• Locations subject to temperatures outside the range specified in the storage or installation temper-
ature conditions.
• Locations subject to humidity outside the range specified in the storage or installation humidity
conditions.
• Locations subject to condensation as the result of extreme changes in temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to dust, salts, or iron dust.
• Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
• Do not hold the product by the cables or motor shaft while transporting it.
Failure to observe this caution may result in injury or malfunction.
• Do not place any load exceeding the limit specified on the packing box.
Failure to observe this caution may result in injury or malfunction.
• If disinfectants or insecticides must be used to treat packing materials such as wooden
frames, pallets, or plywood, the packing materials must be treated before the product is
packaged, and methods other than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core temperature of 56
°C for
30 minutes or more.
If the electronic products, which include stand-alone products and products installed in machines,
are packed with fumigated wooden materials, the electrical components may be greatly damaged by
the gases or fumes resulting from the fumigation process. In particular, disinfectants containing halo-
gen, which includes chlorine, fluorine, bromine, or iodine can contribute to the erosion of the capac-
itors.
• Make sure to follow the conditions on 2.1 Installation Conditions.
Failure to observe this caution may result in electric shock, fire, or SERVOPACK’s malfunction.
• Do not step on or place a heavy object on the product.
Failure to observe this caution may result in injury.
• Do not cover the inlet or outlet parts and prevent any foreign objects, such as metallic frag-
ment, or combustibles from entering the product.
Failure to observe this caution may cause internal elements to deteriorate resulting in malfunction or
fire.
• Be sure to install the product in the correct direction.
Failure to observe this caution may result in malfunction.
CAUTION
CAUTION