ProSoft Technology RLXIB-IHA-A - Manual (Page 37)

RLXIB-IHA ♦ 802.11a Radio Configuration / Diagnostic Utility
RadioLinx® 802.11a Industrial Hotspot User Manual
ProSoft Technology, Inc. Page 37 of 123
July 25, 2013
4 Radio Configuration / Diagnostic Utility
In This Chapter
 Radio Status .......................................................................................... 40
 Radio Network settings.......................................................................... 46
 Security settings .................................................................................... 59
 Radio access settings ........................................................................... 62
 Apply Changes ...................................................................................... 65
 Cancel Changes .................................................................................... 65
 Factory Defaults .................................................................................... 65
The RadioLinx Industrial Hotspot radio has a built-in Radio Configuration /
Diagnostic Utility (radio web configuration form) that allows you to configure the
radio from any computer that can connect to the radio, through a wired Ethernet
connection, or through a Wireless connection.
You can use a web browser such as Microsoft Internet Explorer or Firefox on
your network-enabled desktop computer, laptop or Personal Data Assistant
(PDA) to monitor and change the settings within the RadioLinx Industrial Hotspot
radio.
To open the Radio Configuration / Diagnostic Utility
1 In the RadioLinx Industrial Hotspot Browser, select the radio to configure from
the list view or topography view, and then click the right mouse button to
open a shortcut menu.
2 On the shortcut menu, choose Connect. The Radio Configuration / Diagnostic
Utility will open in your web browser.
Or,
Double-click the selected radio to launch the Radio Configuration / Diagnostic
Utility.
You can also open the Radio Configuration / Diagnostic Utility directly from your
web browser.
Important: Your desktop computer, laptop, or PDA must be connected to the same network as the
RadioLinx Industrial Hotspot radio.
1 Open your web browser.
2 In the address bar, type "
http:// ", followed by the IP address for the radio,
and then click the "Go" button. For example,
http://192.168.6.10