ProSoft Technology RLXIB-IHA-A - Manual (Page 70)

RadioLinx Industrial Hotspot Browser RLXIB-IHA ♦ 802.11a
User Manual RadioLinx® 802.11a Industrial Hotspot
Page 70 of 123 ProSoft Technology, Inc.
July 25, 2013
In the New address/range fields, you can adjust how the program scans for
radios. By default, the program sends a broadcast message to all the radios at
the same time, looking for a response. Broadcasts are limited to a local network,
and will not be passed through a router. If there is a router between the PC
running the RLX-IH Browser and the radio to be scanned, the IP address of the
radio or a range of addresses can be added to the scan list. At each interval
determined by the scan rate, each IP address is individually queried.
5.2.2 Scan
The RLX-IH Browser automatically scans for all active radios on the network at a
regular interval, but you can use the Scan command in the File menu to look for
active radios at any time.
5.2.3 Clear
This command clears (deletes) all entries from the IH Browser window.
5.2.4 Import
This command imports an XML file created by the Export command in the
RadioLinx IH Browser.
5.2.5 Export
This command creates and saves an XML file containing the current
configuration and status of all radios discovered by the RadioLinx IH Browser.
Use this command under the direction of ProSoft Technical Services, for
troubleshooting purposes.