Standard 2 of 5, Standard 2 of 5 enable/disable, Standard 2 of 5 check character calculation – Datalogic QuickScan I QD2400 User Manual
Page 147: Default
Advertising
1D Symbologies
Enter/Exit Programming Mode
Product Reference Guide
137
STANDARD 2 OF 5
The following options apply to the Standard 2 of 5 symbology.
Standard 2 of 5 Enable/Disable
When disabled, the reader will not read Standard 2 of 5 bar codes.
DEFAULT
$CS2EN00(CR)
Standard 2 of 5 = Disable
$CS2EN01(CR)
Standard 2 of 5 = Enable
Standard 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Standard 2 of 5 check
character.
DEFAULT
$CS2CC00(CR)
Standard 2 of 5 Check Character Calculation = Disable
$CS2CC01(CR)
Standard 2 of 5 Check Character Calculation = Enable
Advertising