Datalogic QuickScan I QD2400 - Manual (Page 88)

Enter/Exit Programming Mode Scanning Features
78 QuickScan™ I QD24XX/QBT24XX/QM24XX
Stand Mode Indication
This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue
indicator will blink when Stand Mode scanning is active. If the reader is removed from its Stand
support or from the Base Station (cordless models) and switches out of Stand Mode into Trig-
gered Mode, blinking will stop until Stand Mode is active again.
DEFAULT
$CSMFL00(CR)
Stand Mode Indication = Disable
$CSMFL01(CR)
Stand Mode Indication = Enable