China sensible code set length 2, Default – Datalogic QuickScan I QD2400 User Manual
Page 199
Symbology Selection
Enter/Exit Programming Mode
Product Reference Guide
189
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for
China Sensible Code Length Control on
. Length 2 is the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in incre-
ments of 0001 (pad with zeroes).
See
for detailed instructions on setting this feature.
$CCSL2
Select China Sensible Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
representing
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 7,827 Characters