Datalogic QuickScan I QD2400 - Manual (Page 245)

FEATURES FOR STAR MODELS ONLY Enter/Exit Programming Mode
Product Reference Guide 235
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good transmission as soon as the Base Station
receives a label
• ACK when sent to host — scanner signals a good transmission as soon as the Base Station
has sent the label to the host
• ACK from host — scanner signals a good transmission as soon as the Base Station has sent
the label to the host and host has replied with an acknowledge message.
DEFAULT
ACK from cradle
ACK when sent to host
ACK from host
NOTE
NOTE
The Base Station can receive a host message only if Host Commands Obey/Ignore
(page 27) is set to Ignore.
ACK from host works only for RS-232 or USB-COM interfaces with ACK/NACK disabled.
If ACK from host is configured with any other interface conditions, it works like ACK
when sent to host.
See
"Message Formatting"
on page 237 for details.