System and network layouts, Connecting the base when security pin is enabled, Stand alone layout – Datalogic QuickScan I QD2400 User Manual
Page 25
Advertising
Configuring the Base Station
Product Reference Guide
15
System and Network Layouts
Stand Alone Layout
Reader
Base Station
Host
Connecting the Base when Security Pin is Enabled
When connecting the Base to a system that has a custom Security Pin enabled, follow the steps
below in the order shown:
1. Power down the host system.
2. Connect the appropriate interface cable into the Base
as shown
.
3. Place the reader in the Base.
4. Power up the host. The reader will link to the Base
5. When the host completely powers up, a new custom Security Pin Code may be sent to the
reader and Base, depending on host configuration. Contact Datalogic Technical Support
for more information.
NOTE
If you want to change security settings or set up a PIN, see
Advertising