Gs1 databar™ limited 2d component, Code 93, Code 93 enable/disable – Datalogic QuickScan I QD2400 User Manual
Page 176: Default
Advertising
Enter/Exit Programming Mode
Code 93
166
QuickScan™ I QD24XX/QBT24XX/QM24XX
GS1 DataBar™ Limited 2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a
base label of this symbology is decoded.
DEFAULT
$CLB2D00(CR)
GS1 DataBar™ Limited 2D Component =
Disable (2D component not required)
$CLB2D01(CR)
GS1 DataBar™ Limited 2D Component =
2D component must be decoded
CODE 93
The following options apply to the Code 93 symbology.
Code 93 Enable/Disable
Enables/Disables ability of reader to decode Code 93 labels.
DEFAULT
$CC9EN00(CR)
Code 93 = Disable
$CC9EN01(CR)
Code 93 = Enable
Advertising