Pdf417 set length 2, Default – Datalogic QuickScan I QD2400 User Manual
Page 208
Enter/Exit Programming Mode
198
QuickScan™ I QD24XX/QBT24XX/QM24XX
PDF417 Set Length 2
This feature specifies one of the bar code lengths for
PDF417 Length Control on page 196
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode. Length includes the bar code’s check, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters. Characters can be set from 01 to 2,710
characters (pad with zeroes) in increments of 01. Any value greater than 2,710 will be consid-
ered to be 2,710.
See
for detailed instructions on setting this feature.
$CP4L2
Select PDF417 Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
representing
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 2,710 Characters