Datalogic QuickScan I QD2400 - Manual (Page 23)

Configuring the Base Station
Product Reference Guide 13
Base Station Connection and Routing
1. Remove the rubber Cable Stopper from the bottom of the Base Station.
2. Securely plug the Power Cable and Interface (I/F) Cable connectors into their respective
ports in the underside of the Base Station.
Cable Stopper
Power Cable
I/F Cable
3. After the cables are plugged in, reinsert the rubber Cable Stopper.
Cable Stopper
reinserted
4. Connect to an AC Adapter, and plug the AC power cord into the (wall) outlet.