Canon EOS 90D DSLR Camera with 18-135mm Lens User Manual

Page 257

Advertising
background image

257

Focus Bracketing (Live View Shooting)

o

Focus bracketing is intended for still photo shooting on a tripod.

o

Shooting with a wider angle of view is recommended. After depth compositing,

you can crop the image if necessary.

o

The following lenses can be used (as of April 2019).

• EF16-35mm f/4L IS USM

• EF24-70mm f/4L IS USM

• EF100mm f/2.8L MACRO IS USM

• EF180mm f/3.5L MACRO USM

• EF-S35mm f/2.8 MACRO IS STM

• EF-S60mm f/2.8 MACRO USM

• EF-S18-135mm f/3.5-5.6 IS USM

o

Set

[Exposure smoothing]

to

[Disable]

with the following lenses, because

they may cause changes in image brightness.

• EF100mm f/2.8 L MACRO IS USM

• EF180mm f/3.5 L MACRO USM

• EF-S60mm f/2.8 MACRO USM

o

Suitable

[Focus increment]

settings vary by subject. An unsuitable

[Focus

increment]

setting may cause unevenness in composite images, or shooting

may take more time because more shots are taken. Take some test shots to

decide a suitable

[Focus increment]

setting.

o

Combining images may take some time when the

[Number of shots]

setting

is high.

o

Flash photography is not possible.

o

Shooting under fl ickering light may cause uneven images. In this case,

lowering the shutter speed may give better results.

o

Focus bracketing is not available when the lens’s focus mode switch is set to

<

MF

>.

o

Canceling shooting in progress may cause exposure problems in the last

image. Avoid using the last image when combining the images in Digital Photo

Professional.

o

Use of a tripod, remote switch (sold separately,

=

156), or wireless remote

control (sold separately,

=

156) is recommended.

o

For best results, set the aperture value in a range of f/5.6–11 before shooting.

o

Details such as shutter speed, aperture value, and ISO speed are determined

by conditions for the fi rst shot.

o

To cancel shooting, press the shutter button completely again.

o

[Focus bracketing]

switches to

[Disable]

when the power switch is set to

<

2

>.

Advertising